ISDT BatteryGO BG-8S User Manual page 7

Language
Backlinght
Volume
System Information
Receiver Tester
Alarm Tone
Low Voltage Alarm
USB Charge
Cells Balance
Back
in standby press and hold menu button you can go into system setting.
Auto Storage
Storage Voltage
Charge Current
Charge Voltage
Exception Record
Back
Support up to 7 languages
Back light adjustment, back light will automatically turn off in 2 minutes if no operation( In balancing 20 seconds)
Support high, middle, low and 0 volume. Alarm sound can not be turned off.
Show firmware version
Support multiple prototype testing, PWM\ S.Bus
Low voltage alarm can be set to beep once or beep per minute
Connecting XT60i port, User can select voltage 5-30v as low voltage alarm threshold.
Connecting balance port, user can select single cell voltage 2.5-3.9v as low voltage alarm threshold.
Connecting BattGo smart battery, BG-8S will automatically select battery's lowest discharging voltage as alarm voltage
When XT60i is connecting to battery, BG-8S can support USB charging
When balance port is connecting to battery, BG-8S can support cells balancing.
Exit function menu
When connecting to smart battery,
Auto Storage
Storage Voltage
Charge Current
Charge Voltage
Exception Record
Back
Select after how many hours , Battgo smart battery would initiate auto storage function.
Set storage voltage
Set charge current
Set full voltage
Check exception records of over charging/discharging/temperature
Exit function menu
240h
3.80V
2.6A
4.20V
...