Polaris Hawkeye 2x4 Owner's Manual page 73

MAINTENANCE AND LUBRICATION
Engine Oil
Oil Check
1. Position the vehicle on a
level surface.
2. Place the transmission in
neutral.
3. Lock the parking brake.
4. Start the engine. Allow it to
idle for 30 seconds. Turn the
engine off.
5. The oil dipstick and fill
hole are located behind the
recoil on the right side of
the ATV. Remove the
dipstick. Wipe it clean.
6. Reinstall the dipstick completely.
7. Remove the
dipstick. Check the
oil level.
8. Add oil as needed
to bring the level
between the minimum and maximum marks. Do not overfill.
9. Reinstall the dipstick.
70
R N H