Dashboard Of A Wall; Dashboard Of A Display - Barco KVD User Manual

5. Barco Wall Control Manager Client application

5.4.1 Dashboard of a wall

The name of the wall is indicated below the navigation bar.
The status of each display is indicated by the box color of its position indicator. Green: On, black: Idle, red: Error,
orange: Unknown, grey: not assigned.

5.4.2 Dashboard of a display

The pigeon blue border around the grid shows that the entire wall is selected and will be addressed.
To select a dedicated display only, click in the grid.
If the active page is HOME, this will show the dashboard of the display:
Click on the gray arrow on the bottom of the screen to open the System Info:
On the right of the table, you see a menu icon. Click to open a list box which allows selecting/unselecting the
properties shown in the System Info.
The following properties are available:
Device Type, IP, Connection State, Operation State, Serial, Firmware, Build, LCD Driver, Selected Input, Active
Input, Tiling Position X, Tiling Position Y, Tiling Height, Tiling Width, EDID, Display Mode, CB Mode, Color Tempera-
ture, Locus Distance, Min Brightness, Max Brightness, Target Brightness, Backlight Level, Brightness Correction,
Black Level, White Level, Whitebalance X, Whitebalance Y, CPU Board Temp, OPS Slot Temp, LCD Driver Temp,
Power Supply Temp, Ambient Temp, Fan 1 RPM, Fan 2 RPM, Display Runtime, Backlight Runtime, System Uptime.
_______________________________________________
Barco - Barco Wall Control Manager OVD/KVD/IVD - R591337 - user manual - Revision 04 - March-2016 41