Barco KVD User Manual page 30

The command Add creates an empty record in the table which allows entering MAC Addresses/IP addresses
from scratch.
The command Delete removes the record from the table (Add and Delete refer to web browser level, see
above).
The DHCP Permanent IP table allows editing the MAC address and the IP address. Thus the IP address can be
given according the position in the video wall. To apply the new MAC address or IP address, respectively, the
checkbox needs to be ticked when clicking the Apply button!
To activate any changes in the permanent IP table requires
•
To restart the DHCP server (click Apply)
•
To restart the Green BCM server (On the Green BCM web interface, navigate to BCM
Services. Click on Tasks- BCM Service -restart – now the new address gets visible in
Green BCM. (see screen below))
•
To reboot the display (launch the web interface of the display and push the reboot
button (see screen below))
Barco - Barco Wall Control Manager OVD/KVD/IVD - R591337 - user manual - Revision 04 - March-2016
4. Green BCM web interface
_______________________________________________
30