Overview - Barco KVD User Manual

5.3 Overview

The Barco Wall Control Manager software is a server/client application to control and operate Barco's video walls.
The server application runs on the Green BCM which is a component of every video wall. All displays of a video
wall are connected to the WALL interface of the Green BCM. It is via the DHCP server configured for this interface
that all displays get automatically a unique IP address in the short IP address range (which can then be made
permanent on the Wall DHCP web page of Green BCM).
All actions different from assigning IP addresses and configuration settings are done using the Barco Wall Control
Manager client.
•
Creating/deleting a wall
•
Assigning devices to a wall
•
Color and brightness adjustment of a display (fine tuning SenseX)
•
Brightness adjustment of the entire wall
•
Selection of color temperature of the entire wall
•
Switching a display on/idle
•
Switching the video wall on/idle
•
Selecting the active input of a display
•
Selecting the active input of a wall
It is via the user interface of the client application that commands are sent to the server which addresses the
respective display
The manual describes the currently available functions within the Green BCM client
application.
The web interface of the displays provides additional functionalities like selecting a
timing, uploading firmware and so on.
The web interface of a display can easily accessed via the IP address shown in the
dashboard of the display,
The web interface is explained in the Reference Manual Webinterface OVD/KVD/IVD.
Barco - Barco Wall Control Manager OVD/KVD/IVD - R591337 - user manual - Revision 04 - March-2016
5. Barco Wall Control Manager Client application
cf.5.4.2 Dashboard of a display :
_______________________________________________
34