Oil Injection System; Oil Recommendations - Polaris 600 RUSH Owner's Manual

Engine Break-In

Oil Injection System

Always check and fill the oil bottle when refueling. See page 65.
NOTICE: Serious engine damage can occur without the proper lubrication.
Check the oil bottle level often during the first tank of fuel. If the oil
level doesn't go down, contact your dealer immediately.

Oil Recommendations

This snowmobile is equipped with a variable exhaust system (VES).
Engine lubrication comes from oil added to the fuel and oil injection
systems.
Polaris recommends using Polaris Semi-Synthetic Oil for premixing the
first tank of fuel at 40:1 (one pint of oil per 5 gallons of fuel) and for the
first fill of the oil tank. After this initial treatment, Polaris recommends
the use of VES Gold Plus Synthetic 2-cycle oil. See page 110 for the
part numbers of Polaris products.
Never mix brands of oil. Serious chemical reactions can cause injection
system blockage, resulting in serious engine damage. Oils may also be
incompatible and the result could be sludge formation, filter blockage,
and reduced cold weather flow rates. All Polaris oils are compatible
with each other.
OPERATION
61