The Perfect Fit - Polaris 600 RUSH Owner's Manual

THE PERFECT FIT

Suspension Quick Set-Up Guide
The suspension on your RUSH is incredibly easy to adjust to your
weight and riding style. Just remember three simple steps:
1. Set up rear shock spring preload for rider weight.
2. Adjust the rear spring to tune vehicle balance (ski pressure and
weight transfer).
3. Adjust shock clickers to tune ride quality (stiffer or softer ride).
The following Quick Set-Up Guide walks you through what you need to
know to get started, and additional detail is available on the pages
immediately following the guide. See pages 40-41 for factory and initial
suspension charts for the standard spring as well as for accessory
springs that are available for heavier or lighter riders.
Step 1: Set up rear shock spring preload for rider weight.
Before riding for the first time, use the gauge supplied with your snow-
mobile to adjust rear spring preload to the appropriate setting for the
rider's weight.
Position the narrow end of
the gauge flush with the
spring retainer. Turn the
spring until the rider's
weight setting aligns with
the silver/red junction on
the shock body.
Make no other suspension
adjustments at this time.
Test ride the snowmobile
in various terrain to fully
experience the existing
suspension settings before
making adjustments.
TIP: Initially, heavier riders may want to set the shock clickers 2-4 clicks higher
than lighter riders.
38
Spring Retainer
Silver/Red Junction