Epson PowerLite User Manual page 174

On/Standby Status light
light
Off Flashing blue
Flashing blue Varies
Off Flashing blue
Off Flashing blue
Off Flashing blue
Off Flashing blue
Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and
contact Epson for help.
Parent topic: Solving Problems
Lamp light Temp light
Orange Off
Flashing Off
orange
Off Flashing
orange
Flashing Off
orange
Flashing Flashing
orange orange
Orange Orange
174
Status and solution
Lamp has a problem
• Check to see if the lamp is burned
out, broken, or installed
incorrectly; reseat or replace the
lamp as necessary
• Clean or replace the air filter
• If operating the projector at high
altitude, turn on High Altitude
Mode
• If the problem persists, unplug the
projector and contact Epson for
help
Replace the lamp soon to avoid
damage; do not continue using the
projector
A fan or sensor has a problem; turn
the projector off, unplug it, and
contact Epson for help
Internal projector error; turn the
projector off, unplug it, and contact
Epson for help
Auto Iris error; turn the projector off,
unplug it, and contact Epson for
help
Power error; turn the projector off,
unplug it, and contact Epson for
help