Description Of Parts; How To Use; Change Direction; Ear Loop Attachment And Removal - LG HBM-590 User Manual

Description of parts

Front
SecondaryMIC
PrimaryMIC
Back

How to use

Change direction

4
LED ndicator
Volume Up/Down Button
PWR Slide Switch
Receiver
Charging Port

Ear Loop Attachment and Removal

Attaching the ear loop
- Hold the ear loop just above the base (C shaped part), and snap it into place
behind the speaker on the HBM-590.
Removing the ear loop
- Hold the ear loop at the base (C shaped part), and pull, to unhook the ear loop
from the HBM-590.
* Note: The ear loop can be attached to the HBM-590, as an option, if necessary.
Not every user will need to attach the ear loop.

Charging

- Remove the cover on the charging port and connect the charger.
- When the charger is connected, with the power on or off, the headset will turn off.
- While charging, the LED indicator will show a solid blue light.
- The buttons will not function while the device is charging.
- It takes 2 hours to fully charge the headset.
- When charging is complete, the LED indicator will turn off.

Low battery

- An announcement will be made once every 2 minutes.
(Speech: Battery very low, please charge now)
- If the battery is not charged, the headset will turn off.

Power on

- Move the power switch to the 'ON' position.
•The power will turn on. (Speech: Ready,["battery status"])

Power off

- Move the power switch to the 'OFF' position.
•The Bluetooth link will disconnect, and the power will turn off.
(Speech: Powering Down)

Pairing

- Before using the headset for the first time, you must pair it with a Bluetooth-
enabled handset.
- There are 2 Pairing Mode Methods with the HBM-590.
How to use
5