Table of Contents
Advertisement
How to use
Last number redial
- Press and hold the CALL button for 1 second to activate "Last Number Redial".
The headset will beep, and call the last number dialed.
Ending a call
- Briefly press the CALL button.(Speech: End of Call)
Transferring a call
- While on a call on your handset, briefly press the CALL button on the HBM-590
to transfer the audio to the headset.(headset and handset must be paired)
- And to transfer a call from the headset to handset, press and hold VOLUME UP
button for 5 seconds.
Call waiting
- Answer a second call without hanging up the first call by pressing the CALL button
for 1second (you will hear a beep). Press the CALL button for 1second to turn to
the original call.
- Briefly press the CALL button to terminate the active call or both calls at once.
(subject to handset's support)
Call Reject
- Activate Call Reject by pressing the CALL button for 1second when the handset
rings. (you will hear a beep). (Speech: Call Rejected)
*It is possible to use these functions only when your handset supports them.
For further information about using these features, please consult your handset's
user manual.
Name Alert
TM
The LG HBM-590 is capable of announcing the caller's name, battery status
information, and confirmations of headset operation*.
*NOTE: The Name Alert
TM
function is not supported by all handsets.
Enable/Disable 'Name Alert
TM
'
- Press and hold the VOLUME UP button on the HBM-590 for 5 seconds to enable/
disable 'Name Alert
TM
'. You will hear, "Enabled Name Alert
Alert
TM
".
Language Selection
- The Name Alert
TM
function allows you to choose from 2 different language options.
They are English and Spanish.
- To enter Language Selection Mode, press and hold the VOLUME UP and
VOLUME DOWN buttons simultaneously on the HBM-590 for 3 seconds. You
will hear "Please select language".
8
TM
" or "Disabled Name
- To browse language type, press the VOLUME UP or VOLUME DOWN button
to scroll through the language options.
- To select a language, press the CALL button once after hearing your
language. You will hear "English Selected"
- If no language is selected for 5 seconds, the current language will remain.
(Speech: Cancelled).
Battery Status Alert
- To check the battery status, press and hold the VOLUME DOWN button on
the HBM-590 for 3 seconds.
- There are 4 levels of battery status : "Battery full", "Battery half", "Battery low",
and "Battery very low"
Music Play (A2DP)
The HBM-590 supports music streaming (A2DP).
When you play music from your mobile phone it will automatically transfer to
your headset. Music will automatically pause when you have an incoming call.
When the call is ended the music will start playing again.
Controlling your music is only possible from your handset.
Text / SMS Reader
The LG HBM-590 supports Text / SMS Reader function *.
*NOTE: The Text / SMS Reader function is not supported by all handsets.
Enable / Disable Text / SMS Reader
- With the Power off, press and hold the VOLUME UP or VOLUME DOWN button
and move the power switch to the 'ON' position at the same time for 4 seconds.
- You will hear "Text Reader Disabled" or ''Text Reader Enabled"
Text / SMS Reader*
- To read a text message, double click the CALL button.
- You will hear "Message From <number>" or ''Message From <name>"
* It is possible to use these functions only when your handset supports them. If
your handset doesn't support or no message has been received since the
HBM-590 was connected, the headset automatically plays on long beep tone
instead of Text / SMS reading.
How to use
9
Advertisement
Table of Contents
