Polaris 600 EDGE Touring Owner's Manual page 46

EDGE Touring Suspension (ETS) Adjustments
Torsion Springs
Two torsion springs are used on the rear arm of
the ETS. Preload adjustments can be made by
turning the rectangular adjusters with a spark
plug wrench.
The firm torsion spring should be used if fre-
quent bottoming is encountered during two up
riding on rough trails.
The soft torsion spring should be used for fre-
quent one up riding on smooth trails.
For soft tension, position the long end of the
cam to the front. For firm tension, position the
long end of the cam up.
Front Track Spring and Preload
Front track spring and preload can also be
adjusted. Turn the screw clockwise to
tighten compression (stiffen). Turn the
spring clockwise to tighten preload.
Initial Setup Reference Chart
This chart is only a guideline for initial sus-
pension setup. Your setup may vary based
on your desired riding style.
1 Rider Soft
Firm
2 Riders Soft
Firm
Optional Torsion Spring
Lefthand
Soft 7042139-067
Firm 7042282-067
Torsion
Spring & Position
Block Setting
Low
Med
Med
High
Righthand
7042140-067
7042283-067
THE PERFECT FIT
Screw
RCA Front Track
Spring Preload
(Inches)
1-2 0.25
2-3 0.50
3-4 0.75
4-5 1.00 max
Optional Front Track Spring
Soft Tension
Firm Tension
Spring
Front Track
Indy Select -
Turns From
Full Open
0-1
1-2
1-3
2-3
7041351-067
-------
43