Ignition Switch; Start The Engine And Check - Polaris 500 IQ Shift Owner's Manual

PRE-RIDE INSPECTIONS

Start the Engine and Check

Before starting the engine, always refer to all safety warnings pertaining
to snowmobile operation. Never start your snowmobile without check-
ing all components to be sure of proper operation. See Before Starting
the Engine beginning on page 41.
Engine Stop Switch
n
Check the auxiliary shut-off switch for proper operation. Push the
switch down to stop the engine. Pull it up to allow restarting.

Ignition Switch

n
Make sure the engine stops when the ignition switch is turned to OFF.
Tether Switch (if equipped)
n
If your machine has a tether switch, remove the tether from the switch to
make sure the engine stops immediately.
Lighting
n
Check the headlight (high and low beam), taillight, and brake light.
Replace burned out lamps before operating.
Mirrors (if equipped)
n
Adjust the mirrors so they can be used to their full advantage.
Operating Area
n
Before driving away, check your surroundings. Be aware of obstacles
and make sure bystanders are a safe distance from the machine.
46