Setting Up The Computer; Install - Sharp PN-60TW3A Operation Manual

Install

Caution
• Insert the touch pen adapter into the LCD monitor before installing this software.
• If an older version of this software is installed, remove (uninstall) the old version before installing this software. (See page 11.)
• This can only be done by a user with administrator authority.
1. Start your computer.
2. Exit all applications that are running.
3. Connect the USB cable.
After it has been connected, the touch panel will be automatically recognized.
* The USB port varies depending on the terminal connected to the computer.
DisplayPort 1 input terminal/HDMI 1 input terminal
D-sub input terminal/DisplayPort 2 input terminal/HDMI 2 input terminal/HDMI 3 input terminal USB 2 port (for touch panel)
(Factory setting. Can be changed in TOUCH INPUT SELECT in the SETUP menu.)
4. Insert the supplied CD-ROM into the CD-ROM drive of the computer.
5. Double-click the setup program.
¥TouchpenManagementTool¥Setup.exe
6. For the remainder of the procedure, follow the instructions shown on the screen.
• When the "User Account Control" screen appears, click "Yes" (or "Allow").
• If the "Windows Security" screen appears, click "Install" (or "Install this driver software anyway").
• If the "Software Installation" screen appears, click "Continue Anyway".
This completes the installation of this software.
Each time the computer is started, this software will start automatically to enable the active pen to be used.
TIPS
• When this software is launched, an icon appears on the taskbar.
The icons that appear on the taskbar vary depending on the status of the touch panel and touch pen adapter.
Icon
4
E

Setting up the computer

To the USB terminal
of the computer
USB cable
Touch panel status
Not connected
Connected
Not connected
Connected
USB 1 port*
Touch pen adapter status
Not connected
Not connected
Connected
Connected
USB 2 port*
USB 1 port (for touch panel)