Panmobil SCANNDYbasic User Manual page 7

19 Direct link interface
19 Clock reset switch
20 Product label
21 Battery contacts
22 Tec Pack interface
23
24
25
Interface to connect the cable directly.
Note! The interface can be USB or RS232.
Please read the product label to see the interface
type.
Do not connect an USB configured device to a
RS232 cable or the other way around. This could
damage components inside the device.
Press this switch with a paper clip to reset the
system clock
Note! For the case that the device does not power
ON when pressing the OK button, please perform
a clock reset.
Product and device information label
Battery contacts for charging the Li-Ion battery
TAKE CARE TO NOT DAMAGE THIS PINS WHEN
INSERTING THE RECHARGEABLE BATTERY
Interface to connect additional modules for
ScanndyBasic devices
26
SCANNDY MANUAL
Page 7