Panmobil SCANNDYbasic User Manual page 34

R/W Power
Highlight the menu item "R/W Power (cdbm) and press the left navigation key
(7) to change the Read/Write power of the UHF reader/writer module. The
power can be set from 1dBm to 23dBm.
Input the value as follows:
Value in dBi * 100
Example: 18dBi * 100 input = 1800
Press the OK key (12) to save then settings and return to then UHF Setting
menu.
Fast comm
Highlight then menu item "Fast comm." And press then left navigation key (7)
to select or unselect then fast communication option.
Gen2 session
Highlight the menu item "Gen2 session" and press then left navigation key (7)
to setup the session options.
By setting the session ID, you can optimize the communication between the
reader and the tag. This setting can very helpful if several different Tags and
Tag populations are in the reading field are.
For further information about Gen2 Sessioning, please refer to the EPC GEN2
Tag protocol description
Press then right navigation key (9) to save the settings and return to the main
menu.
SCANNDY MANUAL
Page 34