Panmobil SCANNDYbasic User Manual page 29

Press the OK key (12) to reset the Bluetooth settings or any other key to return
to the Bluetooth main menu.
Menu item Serial
Highlight the menu item Serial and press the left (7) navigation key to enter
the Serial connection settings.
Note!
The settings in this section are only valid for Scanndy devices with serial
RS232 Interface.
Highlight the menu item and set the parameters from the parameter list
according to the requirements of the receiving application. Press the right
navigation key (9) to save the settings and return to the main menu.
Select Back
Bitrate 9600
Parity None
DataBit 8
StopBits 1
DefPort Com2
SCANNDY MANUAL
Page 29