Panmobil SCANNDYbasic User Manual page 19

Wpapsk=
Mode=2
Region=48
Channel=0
Bssid=
For further information please refer to the config_ini reference guide.
4. Save the settings and disconnect the device prom the PC
5. The right LED (2) lights flashes blue (every 1 sec.) for the time the
device is trying to connected to the wireless network and to the host
6. The right LED (2) flashes blue (every 5 sec.) for the time the device is
connected
The Wi-Fi configuration can be seen in the device system menu alternatively.
Read the system menu description for Wi-Fi settings.
Transmitting Barcode and/or RFID data to a host
Batch mode
All Barcode and RFID data scanned in batch mode are saved in the file
"Output.txt" on the removable drive "Scanndy". Connect the device to the host
PC via USB and use the Windows-Explorer to navigate to the device
"SCANNDY". Copy the file "Output.txt" to the host.
To clear the data from the device, delete the file "Output.txt"
SCANNDY MANUAL
Page 19