Steering Wheel Lock - If Equipped; Remote Starting System - If Equipped; How To Use Remote Start; Remote Start Abort Message - Jeep WRANGLER 2017 User Manual

Hide thumbs Also See for WRANGLER 2017:
Table of Contents

Advertisement

Steering Wheel Lock — If Equipped
With the engine running, rotate the steering
wheel one-half revolution in either direction
(six o'clock position), turn off the engine and
remove the key. Turn the steering wheel
slightly in either direction until the lock en-
gages.
REMOTE STARTING
SYSTEM — IF EQUIPPED
This system uses the key fob to start the
engine conveniently from outside the vehicle
while still maintaining security. The system
has a range of approximately 300 ft (91 m).
NOTE:
• The vehicle must be equipped with an
automatic transmission to be equipped
with Remote Start.
• Obstructions between the vehicle and key
fob may reduce this range.

How To Use Remote Start

All of the following conditions must be met
before the engine will remote start:
• Gear selector in PARK
• Doors closed
• Hood closed
• Hazard switch off
• Brake switch inactive (brake pedal not
pushed)
• Ignition key removed from ignition
• Battery at an acceptable charge level
• PANIC button not pushed
• System not disabled from previous remote
start event
• Vehicle security alarm not active
WARNING!
• Do not start or run an engine in a closed
garage or confined area. Exhaust gas
contains Carbon Monoxide (CO) which is
odorless and colorless. Carbon Monox-
ide is poisonous and can cause serious
injury or death when inhaled.
WARNING!
• Keep key fobs away from children. Op-
eration of the Remote Start System, win-
dows, door locks or other controls could
cause serious injury or death.

Remote Start Abort Message

The following messages will display in the
instrument cluster display if the vehicle fails
to remote start or exits remote start prema-
turely:
• Remote Start Aborted — Door Open
• Remote Start Aborted — Hood Open
• Remote Start Aborted — Fuel Low
• Remote Start Aborted — Swing Gate Open
• Remote Start Aborted — System Fault
The instrument cluster display message stays
active until the ignition is turned to the ON/
RUN position.
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wrangler 2017

Table of Contents