Power Off - Seecode SEEFreeKit User Manual

red phone by pressing SEND button or by using phone's bluetooth connect
function. Otherwise (there is no device registered in the Carkit's phone data
base) it will operate in the Pairable mode - in which mode you can register
the phone into the CarKit's phone database. (See LED indication section fo
r additional information)

Power Off

1. When car's operation is off or pulling out the CarKit from the cigar jack the
power will become down automatically.
Pairing
1, Press END button for more than 5 secs.
2. It will notify it is in pairable mode with a melody.
3. Flickering Red and Blue LED at a sec interval by turns means that it is op
erating as pairable mode. (See LED indication section for additional informati
on)
4. Register the CarKit to the Bluetooth
pairable mode.
5. When registration is completed, a melody notifying registration is completed
will be played.
6. Requested Pin No. required while registering is 0000.
7. Example registering process :
1) Check if the CarKit is in the pairable mode.
2) If it is not in the pairable mode, you should press the END button for m
ore than 5 seconds to make the CarKit to enter the pairable mode.
3) Register with the Bluetooth
- Register using a Nokia phone :
Access the menu and scroll to "Bluetooth" → Select "Search for audio
accessories" → The display reads "SEEFreeKit 1.0" → Press "Select"
to make the connection → The display reads "Enter passcode" → typ
e "0000" → Press "Select"
- Register using a Samsung phone :
Select 'Menu No.6' → Select 'Environment configuration' → Select 'Reg
ister device' → The display reads 'XXXXXX' → press Menu No. 2' →
The display reads "SEEFreeKit 1.0" → Press 'Confirm' → Type "0000"
→ Wait until you can read 'Ready to connect'
enabled phone while the CarKit is in
enabled phone.