Table of Contents
Advertisement
Quick Links
®
iHealth
Wireless Blood Pressure Monitor (KD-557BT)
OWNER'S MANUAL
Table of Contents
INTRODUCTION ................................................................................................................. 1
PACKAGE CONTENTS ...................................................................................................... 1
INTENDED USE .................................................................................................................. 1
CONTRAINDICATION ......................................................................................................... 1
PARTS AND DISPLAY INDICATORS ................................................................................ 2
SET UP REQUIREMENTS .................................................................................................. 2
SET UP PROCEDURES ...................................................................................................... 3
BATTERY LOADING .......................................................................................................... 3
MEASUREMENT PROCEDURES ...................................................................................... 4
TAKING YOUR BLOOD PRESSURE READING ................................................................ 5
DISPLAYING STORED RESULTS ..................................................................................... 6
DELETING MEASUREMENTS FROM THE MEMORY ....................................................... 6
SPECIFICATIONS ............................................................................................................... 7
GENERAL SAFETY AND PRECAUTIONS ........................................................................ 8
TROUBLESHOOTING ........................................................................................................ 9
CARE AND MAINTENANCE ............................................................................................ 11
WARRANTY INFORMATION ............................................................................................ 11
EXPLANATION OF SYMBOLS ........................................................................................ 12
CONTACT AND CUSTOMER SERVICE .......................................................................... 13
IMPORTANT INFORMATION REQUIRED BY THE FCC ................................................. 13
OTHER STANDARDS AND COMPLIANCES ................................................................... 14
ELECTROMAGNETIC COMPATIBILITY INFORMATION ................................................ 16
Advertisement
Table of Contents
Related Manuals for iHealth KD-557BT
Summary of Contents for iHealth KD-557BT
-
Page 1: Table Of Contents
® iHealth Wireless Blood Pressure Monitor (KD-557BT) OWNER’S MANUAL Table of Contents INTRODUCTION ......................... 1 PACKAGE CONTENTS ...................... 1 INTENDED USE ........................1 CONTRAINDICATION ......................1 PARTS AND DISPLAY INDICATORS ................2 SET UP REQUIREMENTS ....................2 SET UP PROCEDURES ...................... 3 BATTERY LOADING ...................... -
Page 2: Introduction
INTRODUCTION Thank you for selecting the iHealth Wireless Blood Pressure Monitor. The iHealth Wireless Blood Pressure Monitor is a fully automatic arm cuff blood pressure monitor that uses the oscillometric principle to measure your blood pressure and pulse rate. The monitor works with your mobile device or is alone to test, track and share vital blood pressure data. -
Page 3: Parts And Display Indicators
Pulse Rate Ready to inflate MEM button START SET UP REQUIREMENTS The iHealth Wireless Blood Pressure Monitor is designed to be used with the following iPod touch, iPhone and iPad models: iPhone 4+ iPad mini + iPad Air iPad 2+ iPod touch (5th generation)+ The iOS version of these devices should be V6.0 or higher. -
Page 4: Set Up Procedures
Turn Bluetooth "On" under the "Settings" menu on the iOS device. Wait until the model name printed on the monitor, (i.e. "KD-557BT xxxxxx") and "Not Paired" appear in the Bluetooth menu, and select the model name "KD-557BT xxxxxx" to pair and connect. The Bluetooth indicator will remain steady upon successful connection. -
Page 5: Measurement Procedures
Android device. Wait until the model name printed on the monitor, (i.e. "KD-557BT xxxxxx") appears in the Bluetooth menu, and select the model name "KD-557BT xxxxxx" to pair. it may take up to 30 seconds for your Android device to detect the Bluetooth signal. -
Page 6: Taking Your Blood Pressure Reading
Note: a.Please refer to the cuff circumference range in “SPECIFICATIONS” to make sure that the appropriate cuff is used. b.Measure on the same arm each time. c.Do not move your arm, body, or the monitor and do not move the rubber tube during measurement. d.Stay still, calm for 5 minutes before blood pressure measurement. -
Page 7: Displaying Stored Results
DISPLAYING STORED RESULTS a. After the measurement, you can review the measurements in the current memory bank by pressing button “MEM”. b. Press “START” button to change over to other bank. See picture 7. Confirm your selection by pressing “MEM” button. The current bank can also be confirmed automatically after 3 seconds with no operation. -
Page 8: Specifications
For answers to frequently asked questions, please visit www.ihealthlabs.com SPECIFICATIONS 1. Product name: Wireless Blood Pressure Monitor 2. Model: KD-557BT 3. Classification: Internally powered, Type BF applied part,IPX0,No AP or APG, Continuous operation 4. Machine size: 136 mm ×100 mm × 65mm(5 11/32” x 3 15/16” x 2 9/16”) 5. -
Page 9: General Safety And Precautions
Note: These specifications are subject to change without notice. GENERAL SAFETY AND PRECAUTIONS 1. Read all of the information in the Owner’s Manual and other provided instructions before operating the unit. 2. Consult your physician for any of the following situations: a)The application of the cuff over a wound or inflamed area. -
Page 10: Troubleshooting
professional.The technical alarm is preset in the factory and cannot be adjusted or inactivated. This technical alarm is assigned as low priority according to IEC 60601-1-8. The technical alarm does not need to be reset. This Wireless Blood Pressure Monitor is designed for adults and should never be used on infants, young children, pregnant or pre-eclamptic patients. - Page 11 ANDPRECAUTIONS Incorrect operation or strong Take out batteries for five No response electromagnetic interference minutes, and then reinstall all batteries. 第 10 页 共 16 页...
-
Page 12: Care And Maintenance
4. Clean the monitor with a dry, soft cloth or a moistened and well wrung soft cloth using water, diluted disinfectant alcohol, or diluted detergent. -
Page 13: Explanation Of Symbols
Symbol for “EUROPEAN REPRESENTATIVE” Symbol for “COMPILES WITH MDD93/42/EEC REQUIREMENTS” iHealth is a trademark of iHealth Lab Inc. “Made for iPod”, “Made for iPhone”, and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. -
Page 14: Contact And Customer Service
(2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by iHealth Lab Inc. would void the user’s authority to operate the product. Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. -
Page 15: Other Standards And Compliances
Guidance and manufacture ’ s declaration - electromagnetic emissions The KD-557BT is intended for use in the electromagnetic environment specified below. The customer or the user of the KD-557BT should assure that it is used in such an environment. Emissions test... - Page 16 For ME EQUIPMENT and ME SYSTEMS that are not LIFE-SUPPORTING Guidance and manufacturer ’ s declaration - electromagnetic immunity The KD-557BT is intended for use in the electromagnetic environment specified below. The customer or the user of the KD-557BT should assure that it is used in such an environment.
- Page 17 Recommended separation distances between portable and mobile RF communications equipment and the KD-557BT The KD-557BT is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the KD-557BT can help prevent electromagnetic interference...