Recording A Game - Landro 3100 User Manual

Recording a Game

With your VCR or Game Camera
properly connected to your Landro,
you're ready to set up a new Game
recording.
1) From the Game List, press the blue
New Game button.
2) Press Enter on the "Away Team" for
a list of teams.
3) Navigate to the Away Team for the
Game you are recording and press
Enter.
4) Repeat steps 2-3 for "Home Team",
"My Team" (the team which you are
going to be analyzing, which most of
the time will be your team), "Week",
"Season", "Camera" (if you have
Multi-View software upgrade...visit
www.landro.com
all available upgrades), and
"Category".
For length, you can set it to record
for a specified length of time then
automatically stop recording, or you
can set it so you have to manually
for information on
stop recording.
5) The New Game name will
automatically be filled in with
abbreviated team names, week,
season, and camera information, or
you can delete this name and Type
in your own.
6) If you are not using a routing system,
but are connected directly to a single
VCR or DVD recorder, skip to step 8.
If you are using an IRIS Video
Commander routing system,
Navigate to "Router Dest" and press
Enter.
7) Navigate to the desired recording
source and press Enter.
8) Press Play on your VCR or other
game camera.
9) If you see the Game appear in the
Preview Window in the upper right of
the "New Game" screen, skip to Step
12. If the Preview Window flashes
"No Signal", Navigate to "Setup" and
press Enter.
10) On "Source", press Enter.
11) Navigate to the appropriate
selection (RCA or S-Video), and
press Enter to select the new
source.
12) Navigate to "Save" and press Enter.
34