Page 1
Tectalk Easy 2 User Manual English English...
Page 2
Instructions for Use This set includes 2 walkie-talkie units. These radios operate on PMR446 frequencies. They come with 8 channels as well as a back-lit LCD screen, enabling you to communicate over several kilometers free-of-charge (up to 10 km in open areas) Note: Please read these user instructions carefully before using the equipment and retain for future consultation! Specific Recommendations: If you carry any kind of personal...
(18) (not supplied), ensuring that the poles are correctly aligned. Then close the lid. The arrows indicate in which direction the parts need to be moved. Using the Tectalk Easy 2 Turning the Device On/Off To turn the devices on or off, hold down the Power-button for 3 seconds a BEEP sound will be played to confirm.
Page 5
Adjusting the Volume To increase the volume, press the ▲- button and press the ▼- button to decrease the volume. Note: The volume level is displayed on the screen. Battery Level Indication The battery level is shown by a number of squares present inside the battery icon on the LCD screen.
Page 6
A call tone alerts others that you want to start talking. 4.9.1 Setting the Call Tone. The Tectalk Easy 2 has 10 different call tones. Press the Menu-button two times, “CA” is displayed and the current call tone number is flashing.
Page 7
Press the PTT/Call-button to confirm and return to stand-by mode 4.9.2 Sending a Call Tone Press the PTT/Call-button briefly. The call tone will be transmitted on the set channel. Note: No call tone is transmitted, if the call tone is disabled in the menu.
4.14 Flashlight As an added feature, your Radio has a built-in flashlight. You can activate it by pressing the Lamp button. Specifications Channel numbers and Frequencies Frequency (MHz) Frequency (MHz) Channel Channel 446.00625 446.05625 446.01875 446.06875 446.03125 446.08125 446.04375 446.09375 Transmit RF power: max.