Table of Contents
Advertisement
Quick Start
AirPresence PC Client
1
Enter the IP address of your endpoint in the address box of a web browser. Click Download
AirPresence Client at the bottom. Install the client as prompted.
3
Connect using a projection code
Scan the projection code and click
1. Select an automatically found
.
2
Double-click the
Connect using an IP address and password
endpoint and click
.
Or you can enter the IP address of the
endpoint and click
to connect.
icon to start AirPresence.
AirPresence client
Endpoint's UI
2. To finish setting up the connection,
enter the password and click Connect
on AirPresence or directly select Yes
on the endpoint's UI.
About AirPresence
With AirPresence installed, the PC
can connect to an endpoint and
.
share its desktop over Wi-Fi
(The
PC is located in the same LAN as
the endpoint, and a network
connection can be set up between
them.)
Operating systems supported by
AirPresence:
Windows XP, Windows
Vista, Windows 7/8/10
Mac OS X 10.7, OS X 10.8–
10.11
You can connect to an endpoint
from AirPresence using:
Projection code (default)
This method is available after
the Connection policy is set
to Projection code on the
web interface of the endpoint,
and works for both the
AirPresence mobile and the
AirPresence PC client.
IP address + password (no
projection code)
This method is available only
after the Connection policy
is set to IP + password on
the web interface of the
endpoint, and works only for
the AirPresence PC client.
The default password is
Change_Me.
To specify the Connection policy
for an endpoint, log in to its web
interface, choose System
Settings > Security >
AirPresence, and select a value
from the Connection policy drop-
down list box.
Advertisement
Table of Contents
