Table of Contents
Advertisement
Preliminary Spec. ver
1.4
KS8910 100/10 Mbps ETHERNET TRANSCEIVER
AUTO-NEGOTIATION ADVERTISEMENT : REGISTER 4
[ANAR] 04h
15
14
NextPg
ACK
•
Selector
•
10HalfDup
•
10FullDup
•
100HalfDup
•
100FullDup
•
Rmt_Fault
•
ACK
•
NextPg
.
13
12 11 10
Rmt_Fault
0
0
Protocol Selector
10Base-T Half Duplex
10Base-T Half Duplex
100Base-TX Half Duplex
100Base-TX Half Duplex
Remote Fault
Acknowledge
Next Page Indication
9
8
7
0
100FullDup
100HalfDup
These bits contain the binary encoded protocol selector supported by
this node. (00001) indicates that this device supports IEEE 802.3
CSMA/CD.
1 = 10Base-T HALF DUPLEX is supported by the KS8910.
0 = 10Base-T HALF DUPLEX is not supported by the KS8910.
1 = 10Base-T FULL DUPLEX is supported by the KS8910.
0 = 10Base-T FULL DUPLEX is not supported by the KS8910.
1 = 100Base-TX HALF DUPLEX is supported by the KS8910.
0 = 100Base-TX HALF DUPLEX is not supported by the KS8910.
1 = 100Base-TX FULL DUPLEX is supported by the KS8910.
0 = 100Base-TX FULL DUPLEX is not supported by the KS8910.
1 = Advertised that this device has detected a Remote Fault.
0 = Not Remote Fault detected.
1 = Acknowledge the Reception of Link Partner ability.
0 = Not Acknowledge the Reception of Link Partner ability.
This field only used in the transmitting/receiving of the link code word.
The XCVR Auto-Negotiation state machine will automatically control
this bit in the outgoing FLP bursts, setting it at the proper time during
the Auto-Negotiation process. Write as zero, ignore on read.
1 = Next Page able
0 = Not Next Page able
This KS8910 supports the next page capability.
6
5
10FullDup
10HalfDup
REGISTERS
04h
4
0
Selector
7-7
Advertisement
Table of Contents
