Table of Contents
Advertisement
Settings
Tasks: Select whether to synchronise
]
Tasks or not.
Tasks name: Input the Tasks database
]
name for server access.
]
Memo: Select whether to synchronise
Memo or not.
]
Memo name: Input the Memo database
name for server access.
]
Sync type: Select the synchronization
type below.
- Normal
The phone and the server are required
to exchange information about the
modified data.
- Backup
The phone sends all the data from a
database to the server. The server is
expected to replace all data in the
target database with the data sent by
the phone. This means the phone
overwrites all the data in the server
database.
100
- Restore
The server sends all its data from a
database to the phone. The phone is
expected to replace all data in the
target database with the server sent by
the server. This means the server
overwrites all data in the phone
database.
]
Access point: Select an access point to
use for the data connection.
]
Sync mode: Select the synchronization
mode below.
- Manual
The synchronisation will only occur
when explicitly initiated by the user.
- Automatic
The application will automatically
initiate a sync, based on the
preferences defined (either a regular
reminder or after changes have been
made.)
- Sync frequency
Select the automaic sync preference
when you choose automatic sync mode.
Advertisement
Table of Contents
