Cisco Catalyst 3750-E Software Configuration Manual page 352

Chapter 10 Configuring IEEE 802.1x Port-Based Authentication
Displaying 802.1x Statistics and Status
Displaying 802.1x Statistics and Status
To display 802.1x statistics for all ports, use the show dot1x all statistics privileged EXEC command.
To display 802.1x statistics for a specific port, use the show dot1x statistics interface interface-id
privileged EXEC command.
To display the 802.1x administrative and operational status for the switch, use the show dot1x all
[details | statistics | summary] privileged EXEC command. To display the 802.1x administrative and
operational status for a specific port, use the show dot1x interface interface-id privileged EXEC
command.
Beginning with Cisco IOS Release 12.2(55)SE, you can use the no dot1x logging verbose global
configuration command to filter verbose 802.1x authentication messages.
For detailed information about the fields in these displays, see the command reference for this release.
Catalyst 3750-E and 3560-E Switch Software Configuration Guide
10-68
OL-9775-08