Picture
There is no picture.
The "VIDEO/SAT" function is
selected, but there is no input signal.
Check that the system is connected
securely.
The video cord is damaged. Replace it
with a new one.
Make sure you connect the unit to the
video input jack of your TV (page 27).
Make sure you turn on the TV and
operate the TV correctly.
Make sure you select the video input
on the TV so that you can view the
pictures from the system.
Make sure you set the color system
correctly, according to your TV's color
system (Except for Russian model).
Make sure you connect the unit and
your TV using only the supplied video
cord.
GB
Picture noise appears.
Wipe the disc clean (page 94).
If video signal from your system has to
go through your VCR to your TV, the
copy-protection applied to some DVD
VIDEO programs could affect the
picture quality.
When you play back a VIDEO CD
recorded in a different color system
from the one you set to the system, the
picture image may be distorted (Except
for Russian model) (page 28, 57).
Set the color system to match your TV
(Except for Russian model) (page 28,
57).