Sony MHC-RV555D Operating Instructions Manual page 80


VIDEO INPUT VIDEO jack
Connect the video output jack of an
optional component (such as VCR or
satellite tuner).

VIDEO INPUT AUDIO L/R jacks
Connect the audio output jacks of an
optional component (such as VCR or
satellite tuner).

VIDEO OUT jack
Connect the video input jack of the
TV or projector.

DVD DIGITAL OUT jack
Connect the digital optical input jack
of an optional digital component
(such as amplifier). You can enjoy
5.1 channel sound, if the connected
amplifier equipped with Dolby Digital
or DTS decoder.
Notes
 Sound is output only when the system
function is set to "DVD. "
 If you press AUDIO, SOUND FIELD
or the buttons related to Karaoke
mode (models with Karaoke function
only), or if you connect or disconnect
microphones (models with Karaoke
function only) or headphones, the sound
cuts off for a moment.
0
GB
Listening to a connected VCR or
satellite tuner
1
Press FUNCTION +/ repeatedly
(or press VIDEO/SAT on the unit)
to select "VIDEO" or "SAT. "
2
Start playing the connected
component.
To switch between the "VIDEO" and
"SAT" function
Hold down  on the unit and press
VIDEO/SAT on the unit while the system
is on. The system switches the function
from "VIDEO" to "SAT" or vice versa.
Note
If the sound is distorted or too loud when
"VIDEO" is selected, change the function to
"SAT. "