To specify the slide show speed
(JPEG image files only)
1
Press
DISPLAY. (If "MEDIA" is set to
"MUSIC/PHOTO", press
twice.)
The Control Menu appears on the TV
screen.
2
Press or repeatedly to select
(INTERVAL), then press ENTER.
The options for "INTERVAL" appear
on the TV screen.
3
Press or repeatedly to select the
desired transition interval.
The default setting is underlined.
NORMAL: Sets to the standard
duration.
FAST: Sets the duration shorter
than "NORMAL. "
SLOW 1: Sets the duration longer
than "NORMAL. "
SLOW 2: Sets the duration longer
than "SLOW 1. "
4
Press ENTER.
The selected setting takes effect.
Note
Some JPEG image files (especially progressive
JPEG image files or JPEG image files with
3,000,000 pixels or more) may take a longer
time to display than others, which may make
the transitions seem longer than that of the
option you selected.
0
GB
To select a transition effect for image
files in the slide show
(JPEG image files only)
1
DISPLAY
2
3
4
Press
DISPLAY. (If "MEDIA" is set to
"MUSIC/PHOTO", press
twice.)
The Control Menu appears on the TV
screen.
Press or repeatedly to select
(EFFECT), then press ENTER.
The options for "EFFECT" appear on
the TV screen.
Press or repeatedly to select the
desired setting.
The default setting is underlined.
MODE 1: The image sweeps in
from top to bottom of the screen.
MODE 2: The image sweeps in
from left to right of the screen.
MODE 3: The image stretches out
from the center of the screen.
MODE 4: The image randomly
cycles through the effects.
MODE 5: The next image slides
over the current image.
OFF: Turns off this function.
Press ENTER.
The selected setting takes effect.
DISPLAY