Setting A Programme - Electrolux EWF 1476 GDW User Manual

Hide thumbs Also See for EWF 1476 GDW:
Table of Contents

Advertisement

16
www.electrolux.com
Position A for powder detergent (factory setting).
Position B for liquid detergent.
When you use the liquid detergent:
• Do not use gelatinous or thick liquid detergents.
• Do not put more liquid then the maximum level.
• Do not set the prewash phase.
• Do not set the delay start.
10.5 Activating the appliance
Press the
deactivate the appliance. A tune sounds
when the appliance is activated.

10.6 Setting a programme

1. Turn the programme knob and set
the programme:
• The related programme indicator
comes on.
• The indicator of the
• The display shows the level of the
Time Manager, the programme
duration and the indicators of the
programme phases.
2. If necessary, change the
temperature, the spin speed, the
cycle duration or add available
options. When you activate an
option, the indicator of the set option
comes on.
If you set something
incorrect, the display shows
the message
10.7 Starting a programme
without the delay start
Press
• The indicator of
and stays on.
• The indicator
on the display.
• The programme starts, the door
locks, the display shows the
indicator
• The drain pump can operate for a
short time when the appliance fills
water.
button to activate or
.
.
stops to flash
starts to flash
.
10.8 Starting a programme with
flashes.
the delay start
1. Press
display shows the delay you want to
set.
The related indicator comes on the
display.
2. Press
• The appliance starts the
• The door locks, the display shows
• When the countdown is
After approximately 15
minutes from the start of the
programme:
• The appliance adjusts
automatically the
programme duration
agree with the laundry
load.
• The display shows the
new value.
again and again until the
:
countdown.
the indicator
.
completed, the programme starts
automatically.
You can cancel or change
the set of the delay start
before you press the
cancel the delay start:
• Press
to set the
appliance to pause.
• Press
until the
display shows
• Press
again to
start the programme
immediately.
. To
'.

Advertisement

Table of Contents
loading

Table of Contents