Sony STR-DH510 Service Manual page 9

HISTORY MODE
* The state that the set is used is memorized.
* Procedure:
1. While depressing the [INPUT MODE] and the [MUSIC]
buttons simultaneously, press the [
main power.
2. "HISTORY" appears.
3. Each time the [↑] / [↓] buttons on the remote commander is
pressed, the item is switched in order as follows.
Items
Protector Count
Total single power on time
Sound Field
Input function
Input Mode
Digital Select
Stream information
Signal confi guration
Headphones
Volume
Bass Setting
Treble Setting
Level FL/FR
Level SL/SR
Level CT/SW
Level SBL/SBR
Total power on time
Muting Status
Power on counter
(Rebox test mode)
Protector Type
Temperature when protect
] button to turn on the
?/1
COUNT XX
XXXXXHXX 01
SND FLD
FUNCTION
INP MODE
DIG IN
STREAM
CO XXXXX
HP XXX
VOL XX
BASS XXX
TREB XXX
F XXXXXX
S XXXXXX
CW XXXXXX
B XXXXXX
OH X 02
MUTE XXX
REBX. X
PROT XXXX
TEM XXXX
DCAC TEST MODE
Procedure:
1. While pressing [INPUT MODE] and the [MOVIE] buttons,
press the [ ] button to turn on the main power.
?/1
2. The message "DCAC FTM" appears.
SOURCE : normal mode
MIC IN : mode that output audio from mic input.
3. Afterward, press the [DISPLAY] to start DCAC factory test
mode.
INITIALIZE MODE
All preset contents are cleared when this mode is activated. Use
this mode before returning the product to clients upon completion
of repair.
Procedure:
1. While pressing the [TUNING MODE] and [MUTING] but-
tons, press the [ ] button to turn on the main power.
?/1
2. The message "CLEARING" appears and the memories are re-
set to the default values.
3. When done, the message "CLEARED" appears.
COMMAND MODE CHANGE MODE
The command mode of the remote-commander which this set re-
ceives can be changed.
Procedure:
1. While pressing the [INPUT MODE] and [2CH/A.DIRECT]
buttons, press the [ ] button to turn on the main power.
?/1
2. Either the message "C.MODE.AV1" or "C.MODE.AV2" ap-
pears. Select the desired mode.
USER INITIALIZE
Procedure:
1. Hold the [ ] for 5 seconds.
?/1
2. The message "CLEARING" appears on the display.
3. After a few seconds, "CLEARED" appears.
STR-DH510
9