Sony STR-DH510 Service Manual page 2

Multi channel
Hide thumbs Also See for STR-DH510:
Table of Contents

Advertisement

STR-DH510
1)
Measured under the following conditions:
Area code
Power requirements
US, CND
120 V AC, 60 Hz
2)
Reference power output for front, center and surround speakers.
Depending on the sound field settings and the source, there may be
no sound output.
Frequency response
Analog
10 Hz – 70 kHz,
+0.5/–2 dB (with sound
field and equalizer bypassed)
Input
Analog
Sensitivity: 500 mV/
50 kohms
S/N
(A, 500 mV
Digital (Coaxial)
Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
Digital (Optical)
S/N: 100 dB
(A, 20 kHz LPF)
Output (analog)
AUDIO OUT
Voltage: 500 mV/
10 kohms
SUBWOOFER
Voltage: 2 V/1 kohm
Equalizer
Gain levels
±6 dB, 1 dB step
3)
INPUT SHORT (with sound field and equalizer bypassed).
4)
Weighted network, input level.
FM tuner section
Tuning range
87.5 MHz – 108.0 MHz
Antenna (aerial)
FM wire antenna (aerial)
Antenna (aerial) terminals
75 ohms, unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
Area code
Tuning scale
10 kHz step
530 kHz –
US, CND
1,710 kHz
Antenna (aerial)
Loop antenna (aerial)
Intermediate frequency
450 kHz
2
3)
: 96 dB
4)
)
9 kHz step
531 kHz –
1,710 kHz
Video section
Inputs/Outputs
Video:
1 Vp-p, 75 ohms
COMPONENT VIDEO:
Y: 1 Vp-p, 75 ohms
P
P
80 MHz HD Pass Through
General
Power requirements
Area code
Power requirements
US, CND
120 V AC, 60 Hz
Power output (DIGITAL MEDIA PORT)
DC OUT:
5 V, 0.7 A MAX
Power consumption
Area code
Power consumption
US, CND
230 W
Dimensions (width/height/depth) (Approx.)
430 mm × 157.5 mm × 322 mm
(17 in × 6
projecting parts and controls
Mass (Approx.)
7.4 kg (16 lb 6 oz)
Supplied accessories
• Operating Instructions
• Quick Setup Guide
• FM wire antenna (aerial) (1)
• AM loop antenna (aerial) (1)
• Remote commander (1)
– RM-AAU071 (Models of area code US, CND only)
• R6 (size-AA) batteries (2)
Design and specifications are subject to change without notice.
• Standby power consumption: 0.3 W
• Halogenated flame retardants are not used in the certain
printed wiring boards.
Abbreviation
CND : Canadian model
/C
: 0.7 Vp-p, 75 ohms
B
B
/C
: 0.7 Vp-p, 75 ohms
R
R
in × 12
in) including
1/4
3/4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents