Table of Contents
Advertisement
2. Getting Started
2. Connect LBA-T950 to your computer using charging cable
a) Turn on your computer
b) Connect charging cable to a USB port on your computer
c) Following same steps shown in the previous section using charging
cable instead of power adapter
If the screen doesn't show charging icon, the watch might not be connected
properly to either USB port or power outlet. Once it happens, please follow the
steps again.
Setting time and Date
1.
Press "OK" button shortly to show Top menu " Messaging"
2.
Choose "Setting"
"Time&Date"
3.
Press "Navigation" button to increase the number
4.
Press "OK" key to confirm the Hour and move on to minute
5.
Date setting is similar to time setting procedure shown above.
6. Day is automatically set based on the date
The date and time on this watch can be set to synchronize with those set
on your LGE mobile phone. To set the time and date only once and to
have it set automatically each time this watch gets connected to your
LGE mobile phone.
LGE Confidential
"Time Settings" & "Date settings"
Connecting to your mobile phone
Follow the instructions that came with your mobile phone to place your phone
in paring mode. Pairing process is essential to fully utilize LBA-T950. There
are two ways to establish connection.
Easy Pairing
1. Press "Back" and "Navigation" keys simultaneously for 1 sec and then
the LBA-T950 is ready for pairing
2. Search LBA-T950 from your phone
3. Choose LBA-T950 to pair with your phone
4. When properly done, "Connected" message will be displayed
Manual Pairing
1. Choose "Connectivity"
" Pairing "
2. Following same steps shown in the "Easy Pairing" from step2
Optimum operating range is within 10m. If the LBA-T950 is out of range, the
connection will be lost.
when the LBA-T950 is brought back in the range, it will automatically attempt to
establish the connection
4/14
Challenge
123
Advertisement
Table of Contents
