Making A Push To Talk Call - Nokia 6260 User Manual

r1024_en.book Page 27 Thursday, July 8, 2004 12:40 PM
indicates the push to talk connection. If you have added group(s) to
the phone, you are automatically joined to the active groups, and the
name of the default group is displayed in standby mode.
indicates that the service is temporarily unavailable. The phone
automatically tries to reconnect to the service until you disconnect from
the push to talk service.
If the login fails, you get an error note such as
talk on. Press Options
Settings to open the settings view, or
To disconnect from the push to talk service, select
off.
Options in the sessions view are:
loudsp., Active members,
PTT off, and Exit.

Making a push to talk call

Select Options→Deactivate loudsp./Activate loudsp.
loudspeaker or earpiece for push to talk communication. When the
earpiece is selected, you can use the phone normally to your ear.
Warning: Do not hold the device near your ear when the loudspeaker is
in use, because the volume may be extremely loud.
To make a push to talk call
1. Select Options→PTT contacts
group.
To open the Push to talk groups
2. Press or
OR
Select Options→Send callback
the selected push to talk contact or group.
A tone sounds indicating that the access is granted, and the phone
displays your nickname and group name.
Unable to switch Push to
and select Switch PTT on to try to log in again,
Exit to close the error note.
Deactivate loudsp./Activate
PTT contacts, PTT log, Settings, Help,
and search for a contact person or a
view, press
. This starts a push to talk call immediately.
req.. This sends a callback request to
C a l l f u n c t i o n s
Options→Switch PTT
Switch
to use either
.
27