Answering A Call; Options During A Call - Nokia 6260 User Manual

r1024_en.book Page 24 Thursday, July 8, 2004 12:40 PM
C a l l f u n c t i o n s
5. To end the active conference call, press

■ Answering a call

• To answer an incoming call, press
• To end the call, press
If you do not want to answer a call, press
busy' tone.
When a call comes in, press

Options during a call

Many of the options that you can use during a call are network services.
For availability, contact your network operator or service provider.
Press Options during a call for some of the following options:
Mute/Unmute,
Activate handset
compatible Bluetooth headset is attached), and the network services
End active call, End all
Drop participant, Answer,
Swap - Switch between the active call and the call on hold.
Transfer - Connect an incoming call or a call on hold with an active call
and to disconnect yourself from both calls.
Send DTMF - Send DTMF tone sequences, for example, passwords or
bank account numbers.
Sending DTMF tone sequences
1. Key in the digits with
DTMF tone, which is transmitted while the call is active. Press
repeatedly to produce: *, p (inserts a pause of approximately
2 seconds before or between DTMF characters.), and w (if you use
this character, the remaining sequence is not sent until you press
Send again during the call). Press
2. To send the tone, press OK.
24
.
.
.
. The caller hears a 'line
Silence to quickly mute the ringing tone.
, Activate loudsp., or
calls, Hold/Unhold, New call, Conference, Private,
Reject and:
- . Each keystroke generates a
to produce #.
(if a
Activate handsfree