Adding A Ringing Tone; Voice Dialling - Nokia 6260 User Manual

r1024_en.book Page 38 Thursday, July 8, 2004 12:40 PM
P e r s o n a l i n f o r m a t i o n
• To copy a phone, fax, or pager number from Contacts to your SIM
card, scroll to the contact card you want to copy and select
Options→Copy to SIM direct.

Adding a ringing tone

You can set a ringing tone for each contact card and group. When that
contact or group member calls you, the phone plays the chosen ringing
tone (if the caller's telephone number is sent with the call and your
phone recognises it).
1. Press to open a contact card or go to the Groups list and select
a contact group.
2. Select Options→Ringing
3. Use the scroll key to select the ringing tone you wish to use for the
contact or group and press Select.
• To remove the ringing tone, select
ringing tones.

Voice dialling

Go to Menu→Contacts.
You can make a phone call by saying a voice tag that has been added to
a contact card. Any spoken word(s) can be a voice tag.
Before using voice tags, note that:
• Voice tags are not language-dependent. They are dependent on the speaker's
voice.
• You must say the name exactly as you said it when you recorded it.
• Voice tags are sensitive to background noise. Record voice tags and use them
in a quiet environment.
• Very short names are not accepted. Use long names and avoid similar names
for different numbers.
Note: Using voice tags may be difficult in a noisy environment or during
an emergency, so you should not rely solely upon voice dialling in all
circumstances.
38
tone. A list of ringing tones opens.
Default tone from the list of