Table of Contents
Advertisement
About This Guide
The Vesuvio II Quick Reference Guide (QRG) has basic product information such as connection, mounting, menu
options, and DMX values. Download the User Manual from
Disclaimer
The information and specifications contained in this QRG are subject to change without notice.
Safety Notes
Depending on the amount of fog generated, all fog machines may set off smoke detectors.
•
Drain the tank before transporting the product.
•
This product is not intended for permanent installation.
•
This product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose this product to rain or
moisture.
•
Do not operate this product if the housing, fluid tank, or cables appear damaged.
•
In the event of a serious operating problem, stop using immediately.
•
DO NOT open this product. It contains no user-serviceable parts.
•
Do not use for space heating purposes.
•
Never disconnect this product from power by pulling on the cord.
•
Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
•
USE a safety cable when mounting this product overhead.
•
Do not touch the output nozzle on this product. It is very hot during operation and it may remain hot for several
hours after turning the product off.
•
Do not leave any flammable material within 50 cm of this product while operating or connected to power.
•
Only use Chauvet (QDF) fog fluid.
•
Do not add anything to the fog liquid.
•
Do not drink the fog liquid.
•
Do not allow the fog liquid to touch your skin or eyes.
•
Do not connect this product to a dimmer or rheostat.
•
Only connect this product to a grounded and protected circuit.
•
Only use the handles to carry this product.
•
The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher temperatures.
•
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.
•
CAUTION: When transferring product from extreme temperature environments, (e.g. cold truck to warm humid
ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure, allow
product to fully acclimate to the surrounding environment before connecting it to power.
Contact
Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux contact your distributor to request support or return a
product. Visit
www.chauvetprofessional.com
What is Included
•
Vesuvio II
•
Omega Brackets (x2)
•
Seetronic Powerkon IP65 power cord
•
Warranty Card
•
Quick Reference Guide
AC Power
This product has a fixed voltage power supply and it can work with an input voltage of either 120 VAC, 60 Hz or 230 VAC
50 Hz, depending on the specific model.
Vesuvio II QRG Rev. 1
QUICK REFERENCE GUIDE
www.chauvetprofessional.com
for contact information.
for more details.
EN
1
Advertisement
Table of Contents
