Advertisement
Initial Camera Settings
-
Set Date and Time.
-
Insert and Format an SD memory Card (2 GB or higher recommended).
-
Set Auto Review to "HOLD."
-
Set Rec Mode to "
cannot be set in the underwater mode.
-
Set ISO to "100."
-
Set White Balance to "AWB."
-
Set Flash to Fill to "Forced Flash On
-
Set Macro Mode to "AF Macro
-
Set Picture Size to "12m."
-
Set Quality to "Fine."
-
Set Image Stabilizer to "ON."
-
Set Red-Eye Removal to "OFF."
-
Set AF Assist Lamp to "OFF."
-
Set Minimum Shutter Speed to "1/60."
-
Set AF Mode to "1-Area."
-
Set Quick AF to "OFF."
Notes:
If overexposure occurs, back away from the subject and zoom in.
-
A strobe focusing light is recommended to assist autofocus
underwater.
-
For increased screen brightness turn on "Power LCD."
External Accessory Lenses
An external wide angle conversion lens increases angle of coverage so
you can get much closer to your subject while still fitting everything in the
frame. By reducing the amount of water between the subject and your
camera lens, the resulting image will be more crisp and colorful.
Attach 67mm threaded 6420 Ikelite W-20, Inon Type II and Epoque
lenses using the 9306.78 port adapter. This adapter may also be used to
attach 67mm threaded macro lenses.
Normal Picture", not underwater mode. ISO
."
."
3
Advertisement
