Adjusting Fit; Multi-Shift Pairing - Plantronics CS 70 User Manual

ADJUSTING FIT

1
2
1. Slide the headset over and behind your ear.
2. Rotate and press gently towards your ear for a snug fit.
3. Rotate voice tube microphone until it is pointed towards your chin.
10
3

MULTI-SHIFT PAIRING

1
Enable
Disable
1. To pair another headset to the same base, you must first enable the multi-shift
pairing feature. Long press (5 sec.) the speaking volume minor adjust
back of base until the power indicator light flashes.
2. Place a charged headset in charging cradle and red indicator light on base will flash
for 2 seconds if the multi-shift pairing feature is enabled. Within 10 seconds of
+ -
doing so, press either the " " or " " listening volume button for 3 seconds until the
headset talk indicator lights to indicate pairing mode, and goes out after successful
pairing. Repeat steps 1 and 2 if headset and base do not link when call control
button is pressed.
NOTE: Only the last paired headset will work with the base. You must NOT be in talk mode
(i.e. not on a call) when enabling or disabling this feature.
To disable the multi-shift pairing feature, long press (5 sec.) the speaking volume
minor adjust down button until the power indicator light flashes.
2
up button on
11