Table of Contents
Advertisement
Detect
Detect
The Detect page contains all of the primary detecting
functions:
• Quick Start
• Target Type
• Ground Type
• Noise Cancel
• Sensitivity
• Volume
Quick Start
Quick Start offers minimal setting adjustment, ideal for
beginner users. When Quick Start is selected, the Quick
Start wizard is launched. This will guide you through the
Quick Start process to get you detecting quickly and
easily.
Target Type
The Target Type function allows you to optimise your
detector to search for specific target types.
The available options are:
• Small Nuggets (Default)
• General
• Deep Only
Small Nuggets
This setting is ideal for searching for nuggets between
0.1 and 10 grams and also has good performance for
detecting larger nuggets in shallow ground. This setting
utilises new technology in the GPZ 7000 which provides
a substantial performance increase over existing metal
detectors in detecting smaller nuggets that others have
missed.
General
This setting provides good all round performance in
detecting nuggets of all sizes and at all depths.
Deep Only
This setting is specifically designed for searching for
deeply buried targets. Deep targets produce complex and
subtle audio responses, and as such this setting should
only be used by highly skilled operators. Shallow targets
will not present well on this setting when compared to
the 'Small Nuggets' or 'General' settings. This setting is not
recommended for general use.
When changing the Target Type setting, the threshold
tone will become silent for approximately one second
once a new setting is selected.
Ground Type
When detecting in ground with high levels of iron
mineralisation, movement of the detector over the
ground can produce false target signals. These unwanted
target signals are known as ground noise. The GPZ 7000
detector has been designed to remove unwanted ground
noise. The Ground Type setting controls the amount of
unwanted ground noise that the detector will remove
from the audio.
The available options are:
• Difficult (Default)
• Normal
Difficult
This setting is recommended as gold is usually found in
areas with high levels of iron mineralisation.
Normal
This setting should only be used in areas where the
ground is known to be 'quiet' ground. If unwanted ground
noise is heard while operating in the 'Normal' setting, the
operator should change to the 'Difficult' setting.
When changing the Ground Type setting, the threshold
tone will become silent for approximately one second
once a new setting is selected.
17
Advertisement
Table of Contents
