Changing Coils; Swing Arm; Harness And Extras; Charging Batteries - Minelab GPZ 7000 Instruction Manual

Charging Batteries

Changing Coils

A range of accessory coils are available for your GPZ 7000.
To change a coil, follow the 'Assembling the detector'
steps with the alternative coil.
Always check that the coil connector is dry and free of grit
and dust before connecting to the detector.
Note
All Minelab GPZ 7000 coils come with
the lower shaft pre-assembled to the coil.
Disassembling a coil from its lower shaft is
not recommended.

Swing Arm

Harness and Extras

6