Uconnect access User Manual page 193

Answer Or Ignore An Incoming Call — No Call
Currently In Progress
When you receive a call on your mobile phone, the
Uconnect™ Phone will interrupt the vehicle audio sys-
tem, if on, and will ask if you would like to answer the
call. Press the button to accept the call. To ignore the
call, touch the "Ignore" soft-key on the touch-screen. You
can also touch the "answer" soft-key or touch the caller
ID box.
Answer Or Ignore An Incoming Call — Call Currently
In Progress
If a call is currently in progress and you have another
incoming call, you will hear the same network tones for
call waiting that you normally hear when using your
mobile phone. Press the phone
key or caller ID box to place the current call on hold and
answer the incoming call.
NOTE: The Uconnect™ Phone compatible phones in the
market today do not support rejecting an incoming call
when another call is in progress. Therefore, the user can
only answer an incoming call or ignore it.
Making A Second Call While Current Call Is In
Progress
To make a second call while you are currently on a call,
press the
by the phone number or phonebook entry you wish to
call. The first call will be on hold while the second call is
in progress. Or you can place a call on hold by touching
the Hold soft-key on the Phone main screen, then dial a
number from the dialpad, recent calls, SMS Inbox or from
the phonebooks. To go back to the first call, refer to
"Toggling Between Calls" in this section. To combine two
button, answer soft-
calls, refer to "Join Calls" in this section.
Uconnect™ ACCESS USER'S MANUAL 193
button and say "Dial" or "Call" followed
1