Table of Contents
Advertisement
Disassembly method
Removing the front chassis (See Fig.1)
1. Remove two screws A and insert a screwdriver to the
joints a on the side of the front chassis and two joints b
on the right side, then detach the front chassis toward the
front side.
Removing the heat sink (See
1. Remove the three screws B attaching the heat sink on
the left side of the body, and remove the heat sink.
Removing the bottom cover (See
1.
Turn the body upside down.
2.
Insert a screwdriver to the two joints c and two joints d on
both sides of the body and the joint e on the back of the
body, then detach the bottom cover from the body.
Fig.2 )
Fig.3 )
A
A
a
b
a
b
Front chassis
Fig.1
B
Heat sink
B
Fig.2
c
Regulator board
e
Fig. 3
KD-SX975 / KD-SX875
B
d
1-5
Advertisement
Table of Contents
