JOVY Systems Jetronix-Eco Quick Start Up Manual page 7

Quick Start Up Guide
right click properties then compatibility and chose run this
program as administrator , then Apply.
4. Run the USB driver executable file and connect switched on
Jetronix USB cable to a PC, the drivers should be detected
automatically. Jetronix LCD shows USB connected. If the USB not
detected automatically, choose to install the driver files manually.
The driver source files in the CD folder named – USB driver source
file.
4- Connecting the Machine to Software
1. Run Jetronix Suite, the machine status on software will be
2. Connect switched on Jetronix to PC and when connection
established the status on Software shows, USB connected.
3. Click Tools to connect the machine.
4. If the connection successful, the machine LCD shows and
Machine status over the Software shows.
5. Choose the Software settings, from Tools then settings.
Define the temperature scale unit °C/°F and Software
language (only English available in the first release).
7 Jovy Systems® Limited
Jetronix-Eco