Itronix Duo-Touch Getting Started page 23

Display and Pen Basics
3. Select the Digitizer / Touch Screen button to change between digitizer and touch screen modes.
Calibrating the Digitizer Touch Panel
1. From the Start Menu, select Control Panel.
2. If you are in Classic View continue to step 3. If you are in Category View select Printers and Other Hardware
and continue to step 3.
3. Select Tablet and Pen Settings and then select the Settings tab.
4. Under the Calibration field, choose the orientation you want to calibrate, either Landscape or Portrait.
NOTE The Duo-Touch must be in the orientation you are calibrating and each orientation must be calibrated
separately.
mk:@MSITStore:C:\Documents%20and%20Settings\barvillj.ITRXNT1\My%20Documents...
Page 3 of 5
5/5/2005