Watching the TV
Press U to turn on the TV.
When the TV is turned on in the standby mode, the
u/Â indicator on the TV lights up. To turn on the
TV completely, press u on the remote commander
or the TV.
Select the TV program you want to watch.
To select a program position directly
Press the number button.
To select a two-digit program position, press "÷"
before the number buttons.
For example: to select program position 25, press
"÷," then "2" and "5."
To scan through program positions
Press PROGR +/– on the remote commander or the
TV until the program position you want appears.
Press Á +/– on the remote commander or
the TV to adjust the volume.
Turning off the TV
To turn off the TV temporarily
Press u on the remote commander. The u/Â
indicator lights up.
To turn off the TV completely
Press U on the TV.
Watching the video input
on the remote commander or ... on
To watch TV
Press ; on the remote commander or ... on the TV.
Switching back quickly to the previous
Muting the sound
Displaying the on-screen information
POWER BASSO: ON
• The on-screen display shows the program position or the video
mode, the picture and sound information. The on-screen
display for the picture and sound information disappears after
being displayed for approximately three seconds.
Setting the Sleep Timer
You can set the TV to turn off automatically after the
period of time you want.
After 30 minutes
After 60 minutes
No Sleep Timer
After 90 minutes
To cancel the Sleep Timer, press
"SLEEP TIMER: OFF" appears, or turn the TV off.