PEUGEOT 208 2017 Handbook page 285

The "USB peripheral error" or "Peripheral not
recognised" message appears on the screen.
A telephone connects automatically,
disconnecting another telephone.
The iPod is not recognised when connecting to
the USB port.
The hard disk or device is not recognised when
connecting to the USB socket.
When streaming, the sound cuts momentarily.
In "Random all" play, not all of the tracks are
played.
With the engine off, the audio system switches
off after a few minutes of use.
The message "the audio system is overheated"
appears on the display.
The USB memory stick is not recognised.
Automatic connection overrides manual
connection.
The iPod is of a generation that is not
compatible with the USB.
Some hard disks and devices need a power
supply greater than is provided by the audio
system.
Some telephones prioritise connection of the
"hands-free" profile.
In "Random all" play, the system can only take
into account up to 999 tracks.
When the engine is switched off, the audio
system operating time depends on the battery
charge.
The switch-off is normal: the audio system
switches to economy mode and switches off to
prevent discharging the vehicle's battery.
In order to protect the installation if the
surrounding temperature is too high, the audio
system switches to an automatic thermal
protection mode leading to a reduction of the
volume or stopping of the playing of the CD.
Audio system / Bluetooth
Use only USB memory sticks formatted to FAT
32 (28-bit file allocation table).
Modify the telephone settings to remove
automatic connection.
Connect the peripheral to the 230 V socket, the
12 V socket or an external power supply.
Caution: ensure that the device does not
transmit a voltage greater than 5 V (risk of
destruction of the system).
Delete the "hands-free" connection profile to
improve streaming.
Start the vehicle's engine to increase the battery
charge.
Switch the audio system off for a few minutes to
allow the system to cool.
®
.
15