Memorising Speeds - PEUGEOT 208 2017 Handbook

Driving
When changing the programmed
reference speed by means of a maintained
press, pay attention as the speed can
increase or decrease rapidly.
Do not use the cruise control on slippery
roads or in heavy traffic.
On a steep descent, the cruise control will
not be able to prevent the vehicle from
exceeding the registered speed.
The cruise control system cannot in
any circumstances replace the need
to observe speed limits or the need for
vigilance on the part of the driver.
To avoid any risk of jamming the pedals:
- ensure that the mat is positioned and
secured to the floor correctly,
- never place one mat on top of another.
126

Memorising speeds

This function allows speeds to be saved, which
can then be offered to set the two systems: the
speed limiter (to limit the speed of the vehicle)
or the cruise control (for a vehicle cruising
speed).
You can memorise up to five settings in the
system for each of the two systems.
By default, some speed settings are already
memorised.
With touch screen
This memorisation can be
configured from the menu Driving /
Vehicle.
F Select the "Driving functions" tab.
F Select the "Adjusting Speeds" function.
F Press "ON" to activate the function.
F Select the speed setting 1 to 5 that you want
to change.
F Select the speed setting value you want to
change.
F Enter the new value using the numerical
keypad and confirm and click on "OK" to
confirm.
As a safety measure, the driver must carry
out these operations when stationary.
Selection
To select a memorised speed:
F Press and hold the "+" or "-" button; the
system stops at the nearest memorised
speed.
F Press and hold again the "+" or "-" button to
select another memorised speed.
A reminder of the speed and the state of the
system (on / off) is displayed in the instrument
panel.