1: Attaching The Table-Top Stand - Sony Bravia KDL-65W950B Operating Instructions Manual

1: Attaching the
Table-Top
Stand
xRecommended (edge position)
Refer to the supplied Table-Top Stand
leaflet for proper attachment.
1
Remove the cushion of the right side 1,
and attach the Table-Top Stand to the
TV 2.
2
Repeat step 1 for the left side.


3
Fix the TV to the Table-Top Stand using
the supplied screws.
The arrow marks
location of the screw holes used for
securing the Table-Top Stand.


indicate the
~
• If using an electric screwdriver, set the
torque at approximately 1.5 N·m {15 kgf·cm}.
• Two or more people are needed to carry out
this installation.
• Be careful not to pinch the finger during
installation.
xAlternative (middle position)
You can change the Table-Top Stand from
the edge to the middle position by referring
to the instructions below.
Middle position
1
Thick cushion
2
1
2 3
1
2
3
(Continued) 9
GB