2: Connections - Sony Bravia KDL-65W950B Operating Instructions Manual

~
• Ensure that there are no objects in front of the TV.
IR Sensor
Detaching the Table-Top
Stand from the TV
To detach the Table-Top Stand from the TV,
remove the screws
~
• Do not remove the Table-Top Stand for any
reason other than to install corresponding
accessories on the TV.
• For bracket installation, refer to the instruction
guide provided by the Wall-Mount Bracket model
for your TV. Sufficient expertise is required in
installing this TV, especially to determine the
strength of the wall for withstanding the TV's
weight.
For product protection and safety reasons,
Sony strongly recommends that you use
the Wall-Mount Bracket model designed for
your TV and the wall-mounting of your TV
should be performed by Sony dealers or
licensed contractors.
Hiding the camera
If you do not wish to use the camera, hide it
as illustrated.
10
GB
.

2: Connections

~
• Use an antenna (aerial) cable connector no
greater than 14 mm in thickness.
• Use an HDMI cable connector within 12 mm
(thickness) × 21 mm (width).
• 在将电视机与有线网络连接时，请务必在天线电缆
与有线网络端子之间接入随机提供的天线隔离器。
否则可能会引起着火等危险。
• 如果有线网络端子的形状特殊、无法与天线隔离器
连接，请另行购买可将二者匹配的转接头连接使
用。
• To select an input device connected to the TV,
press 输入选择 .
• For more information on connections, refer to the
i-Manual.
Connecting an antenna
(aerial)/cable/VCR
xTo connect an antenna (aerial)/
cable
天线隔离器
（随机提供）
有线
网络
端子
Antenna (aerial) cable
(not supplied)